Build Your Own Solar Panels

Previously the materials necessary to build your own solar panels could only be found in commercial areas and home improvement stores. However recently, there has been a large increase in the amount of people using DIY also known as do it yourself kits. Many of these great resources show you step by step how to build your own solar panel with videos in as little as one day. You can build your own solar power system in your own home without the help of a professional.

Interested In Building Your Own Solar Power Generator?

There are many good sources for acquiring all of the parts and pieces you will need on the internet as well as you local hardware store. Even if your budge is just a couple hundred dollars, you can build your own solar power generator. A device like this can handle powering DC appliances, computers, lights, modems as well as others. You can also use a system like this in a vacation home like a cabin, tents, as well as on camping excursions. These kind of solar power systems are even well suited for travelers who visit undeveloped countries.

Steps To Building Your Own Solar Power System
The first thing you will need to do is either build or buy a small solar panel. A device which is rated at 12 volts or higher will run about $100 and you can get one at an RV or marine store. Second, you will need a rechargeable battery which you can pickup at any “green” company. Any size deep cycle battery with a 12 volt lead and an acid or gel base will work. Since your are going to build your own solar panel which runs nonstop, having a deep cycle battery is necessary. You may also want to bargain shop and find one for about $55.

Next you will move the battery box to where you will put the generator in. You can build your own box or pick one up for about $5. A wooden box is well suited and will cover the exposed battery terminals to keep it safe from any children who may come in contact with it. If you will be installing your solar power system in a more confined area like a pump house, outdoor shed, in a boat or in a cabin you can get away with bypassing this step. Next, you will want to purchase a DC input with a triple inlet. This will cost you around $25. Purchase a DC input. The triple inlet model is recommended. You can find one for only $10 at just about any normal car parts store. You will then be able to power DC items including vacuum cleaners, lights and hair dryers.

In addition, if you plan to power AC appliances it will require and inverter which converts the storage of DC power in the battery into AC power to run most household appliances. You can also get an inexpensive inverter which come in multiple sizes online as well.

Now you are ready to drill holes and connect the meter on to the DC input on top of your storage box and complete the process to build your own solar panels.

How To Charge
For best results use insulated wire to attach the meter to the terminals on the battery. Then, link the negative terminal. Be careful to only handle one wire at a time. Next, you will connect the DC inlet directly to the battery. Also, link your solar panel to the battery in the same manner. You can now close the lid and secure it with rope. Once you place the solar panel under sunlight it will take about 5-8 hours to charge batteries. You will then be able to power multiple devices like a fan, radio or light fixture.

To learn more about getting started with your build your own solar panels project please visit: http://www.homesolarpaneldepot.com/best-home-solar-energy-guides.php